Overview

LC-512S is the world smallest embedded wireless DMX512 transceiver module. Its compact size is 25.4 x 12.7 mm, just as small as a fingernail. With single side component placement, stamp pad and 3.3V Single-Supply, As a DMX component, you can easily put LC-512S into your light equipment and you would own the world's leading wireless DMX control system.

Multiple Communication Protocol, no upgrading trouble

WIDMX LC-512S is compatible with the world's leading wireless communication protocols like the Sweden's protocol or the GZ protocols. So there is no upgrading trouble.

Application

• Stage lighting applies to the Grand Variety Show, Gymnasium, Temporary Set-up Stage, TV Station, Centers Conference, Theaters, Opera, Theme Parks, Dance Halls, and Bars, or any lighting equipment with standard DMX512 XLR etc.

Features and Benefits

- FHSS with 79 Channels, interference-free operation.
- 32-bit ARM Processor, DMA transfer without delay
- 1.27 pitch stamp pads, Transceiver
- One-touch operation with a Tri-color status indicator
- Built-in Wireless Solution Compatibility Mode
- Automatically learning of various parameters of controller, just like DMX transfer via cable
- Group Mode, easy plug-and-play operation; Pairing Mode, supports more transmitter universes

Pinout

Dimensional drawings

Description of Status Indicator

1）In the Set-up mode, different colors mean different communication protocols:

2）In the Use mode, Description of Status Indicator:

Operation Guide

1.Set-up mode:

Press and hold the button before you power up. When you see status indicator turns into the white light, release the button to enter the Set-up mode. In this mode you can select different transmission protocols. Each time you press the button, you would see the status indicator changes in following order: red, green, blue and yellow. Choose one of the protocols,then press and hold the button (> 1S), when you see the white light, release it to enter the use mode.

2.Use mode:

1) Powered up and enter the Use mode;
2) If it is in Set-up mode, press and hold the button (> 1S) until you see the white light, then release it to enter the Use mode.

2.1.In WIDMX protocol or GZ protocol, you could select different DMX Group:

1) The first time when you press the button, it will not change the color but show you the group that you are in.
2) If you press it again it will switch to other group.

2.2.In W-DMX Transmit protocol:

1) By pressing the button, the transmitter can be connected to all powered but not connected receivers within the coverage area;
2) Press and hold (> 3S) the transmitter’s button until the indicator turns red. The device will delete all the receivers' connection within the coverage range.

2.3.In W-DMX Receive protocol:

Press and hold (> 3S) the receiver’s button until the indicator turns white. The device would disconnect with the transmitter.

Weight and Dimension Dimension: 25.4 x 12.7 x 2 mm
Weight: 5 g
System Information CPU: 32-bit ARM Core
Radio Parameters Range: 600 meters (line-of-sight)
Frequency: 2.402 - 2.480GHz, ISM, 79 channels
Spread Spectrum: FHSS, 1100 hops / sec
Modulation: GFSK
Maximum Transmit Power: 22dBm
Receiver Sensitivity: -93dBm
DMX Signal Interface TTL
Environmental Limits Operating Temperature: -40 ~ 85 °C
Storage Temperature: -65 ~ 150 °C
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements Power Input: DC 3.3V, ±5%
Power Consumption: 350 mA@3.3V DC max.
Reliability Automatic Reboot Trigger: Built-in WDT (watchdog timer)
Warranty Warranty: One-Year Limited Warranty